Market Report Last Verified: March 18, 2026
Pre-Fabricated Acoustic Deployment
Building a custom dual-subwoofer enclosure requires precise acoustic mathematics and heavy woodworking machinery. The KICKER 48DCWR122 Loaded Enclosure eliminates fabrication entirely by pre-mounting two 12-inch CompR subwoofers into a factory-tuned, front-vented MDF box. We verified a massive $110 market reduction, locking the execution floor at $439.99. Internally wired to a final 2-ohm impedance, this 86-pound acoustic array requires zero internal assembly—simply supply 1000 watts of continuous RMS power to generate brutal low-frequency sound pressure.
Suggested Intelligence: KICKER CompR 12" 2-Ohm Subwoofer (48CWR122) - 20% Off ($151.99)
Navigation Matrix
Purchase & Savings Logistics
| Current Executable Price | $439.99 |
| Total Savings | $110.00 (20% Off MSRP) |
| Original MSRP | |
| Trade-In Row | Not Available |
| Shipping Status | Free Standard Fulfillment / Store Pickup |
| Manufacturer Coverage | 1-Year Parts & Labor Support |
| Community Validation | ⭐⭐⭐⭐⭐ (4.8/5) - 315 verified deployments |
Hardware Architecture
| Manufacturer | KICKER |
| Model Designation | 48DCWR122 (SKU: 6452188) |
| Continuous Power | 1000 Watts RMS (Total for both subs) |
| Final Impedance | 2-Ohm (Internally Wired) |
| Driver Specifications | Dual 12-inch CompR Subwoofers |
| Enclosure Dimensions | 32.75" W x 17" H x 17.63" D |
| Chassis Mass | 86.95 lbs |
| Box Architecture | Heavy-Duty MDF (Ported/Vented) |
System Restraints & Structural Limits
- ✓ Asset: Factory Acoustic Tuning: Designing a dual 12-inch ported box from scratch requires complex port-length calculations to prevent driver cancellation. KICKER engineers tuned this specific MDF enclosure at the factory to perfectly match the TS parameters of the CompR subs, maximizing SPL (Sound Pressure Level) output.
- ✓ Asset: Plug-and-Play Wiring: The internal voice coils of both subwoofers are already wired to present a stable 2-Ohm load to a single external terminal cup. You do not have to unscrew the subs and wire them yourself.
- ✗ Micro-Flaw: Extreme Physical Footprint: Weighing 87 pounds and stretching nearly 33 inches wide, this is a massive piece of hardware. It will permanently consume the cargo space of any hatchback or standard sedan. It is incredibly difficult to remove quickly for hauling groceries.
- ✗ Micro-Flaw: Electrical Grid Strain: Pushing 1000 Watts RMS requires significant current draw (often exceeding 100 Amps). Hooking this system up to a standard factory alternator and an old lead-acid battery will cause severe headlight dimming and potential voltage drops unless a capacitor or secondary battery is integrated.
Market Valuation Tracker
| Current Executable Floor: | $439.99 |
| Measured Peak MSRP: | $549.99 |
Execution Logic: Purchasing two raw CompR 12" subwoofers separately would cost over $300 alone, not factoring in the cost of heavy MDF wood, carpeting, wiring, and labor to build a box. Executing on this pre-loaded enclosure for $439.99 is a highly efficient deployment of capital, securing a ready-to-run 1000W system while saving $110 off the retail ceiling.
Tactical Command Authorization
Strategic Directive: If you want maximum low-frequency SPL output without the friction of designing and building a custom box, execute the $439.99 transaction on the 48DCWR122. Ensure your vehicle has the physical space to house an 87-pound enclosure. Execution Tip: Do not underpower this array. Supplying only 300W or 500W to a system designed to handle 1000W RMS will result in a clipped, distorted signal that will eventually melt the voice coils. Pair this exactly with a 1000W RMS @ 2-Ohm monoblock amplifier.
KICKER CompR Dual 12" Enclosure
$439.99
Execute Deal
ElectroSavvy Logic Disclosure: Pricing, SKU (6452188), and hardware specifications verified via Best Buy manifest. Independent Analysis: Every deal is manually verified to ensure data accuracy and hardware viability for our readers. Hardware acquisitions are evaluated strictly on verified price floors, manufacturer reliability, and active warranty support to ensure a comprehensive and structurally sound deal.
Frequently Asked Questions
Do I need to wire the subwoofers inside the box myself? +
No. The 48DCWR122 comes pre-wired internally from the factory. You simply plug your amplifier speaker wire into the single set of external spring terminals located on the side of the enclosure.
What is the final impedance at the terminal cup? +
The box presents a final 2-Ohm load to your amplifier. You must ensure your monoblock amplifier is rated to produce 1000 Watts RMS specifically at 2 Ohms.
Will this box fit in the trunk of a standard sedan? +
It is extremely large. Measuring 32.75 inches wide and 17.63 inches deep, it will consume the majority of trunk space in a mid-size sedan like a Honda Accord or Toyota Camry. Measure your trunk clearance before acquiring.
Independent Analysis: Hardware acquisitions are evaluated strictly on verified price floors, manufacturer reliability, and active warranty support to ensure a comprehensive and structurally sound deal.